Feasibility Study of Using Different Types of Bio-Polymer Coatings on Paper Packaging Materials

Document Type : Scientific Paper

Authors

1 Sari Agricultural Sciences and Natural Resoures University Faculty of Natural Resources

2 Department Sari Agricultural Sciences and Natural Resoures University

Abstract

Environmental concerns about the use of synthetic compounds and coatings for packaging applications have increased. The barrier properties and wettability of the paper are usually controlled by the use of oil-based derivatives such as polyethylene, wax, or fluorinated derivatives as coatings. While surface hydrophobicity is improved through the use of these polymers. These compounds are undesirable due to limited fossil fuel resources, poor recyclability, and environmental concerns about waste generated due to non-biodegradation. As a result, renewable biopolymers can be used as barrier coatings on paper packaging materials. Biopolymers include polysaccharides, proteins, lipids, and polyesters are used on paper coatings. These biopolymer coatings may delay the unwanted transfer of moisture to food products, are a good barrier to oil and oxygen, are biodegradable, and have the potential to replace synthetic paper and cardboard coatings.

Keywords

References

1. Bellussi, G.; Bohnet, M.; Bus, J.; Drauz, K.; Greim, H.; Jäckel, K.-P.; Karst, U.; Kleemann, A.; Kreysa, G.; Laird, T.; et al. (2000). “Ullmann’s Encyclopedia of Industrial Chemistry;” Wiley-VCH Verlag GmbH & Co. KGaA: Weinheim, Germany.
2. Tang, X.Z.; Kumar, P.; Alavi, S.; Sandeep, K.P.(2012). “Recent advances in biopolymers and biopolymer-based nanocomposites for food packaging materials.” Crit. Rev. Food Sci. Nutr, 52, 426–442.
3. Khwaldia, K.; Arab-Tehrany, E.; Desobry, S. (2010). “Biopolymer coatings on paper packaging materials.” Compr. Rev. Food Sci. F 2010, 9, 82–91.
4. Andersson, C. “New ways to enhance the functionality of paperboard by surface treatment—A review. Packag.” Technol. Sci. 21, 339–373.
5. Rasal, R.M.; Janorkar, A.V.; Hirt, D.E.(2010). “Poly(lactic acid) modifications.” Prog. Polym. Sci, 35, 338–356.
6. Cheng, H.-Y.; Yang, Y.-J.; Li, S.-C.; Hong, J.-Y.; Jang, G.-W. (2015). “Modification and extrusion coating of polylactic acid films.” J. Appl. Polym. Sci. 132, doi:10.1002/app.42472.
7. Mekonnen, T.; Mussone, P.; Khalil, H.; Bressler, D. (2013). “Progress in bio-based plastics and plasticizing modifications.” J. Mater. Chem. A, 1, 13379–13398.
8. Lao, H.-K.; Renard, E.; Linossier, I.; Langlois, V.; Vallée-Rehel, K. (2007). “Modification of poly(3-hydrox ybutyrate-co-3-hydroxyvalerate) film by chemical graft copolymerization.” Biomacromolecules, 8, 416–423.
9. Kjellgren, H.; Gällstedt, M.; Engström, G.; Järnström, L. (2006). “Barrier and surface properties of chitosan-coated greaseproof paper.” Carbohydr. Polym. 65, 453–460. Coatings 2015, 5 922
10. Yang, N.; Deng, Y. (2000). “Paper sizing agents from micelle-like aggregates of polystyrene-based cationic copolymers.” J. Appl. Polym. Sci., 77, 2067–2073.
11. Mahendrasingam, A.; Martin, C.; Fuller, W.; Blundell, D.J.; Mackerron, D.; Rule, R.J.; Oldman, R.J.; Liggat, J.; Riekel, C.; Engström, P. (1995). “Microfocus X-ray diffraction of spherulites of poly-3-hy droxybutyrate.” J. Synchrotron. Radiat. 2, 308–312.
12. Van Tuil, R.; Fowler, P.; Lawther, M.; Weber, C.J. (2000). “Properties of biobased packaging materials. In Biobased Packaging Material for the Food Industry—Status and Perspectives,” 1st ed.; Weber, C.J, Ed.; The Royal Veterinary and Agricultural: Fredriksberg, Denmark, pp. 13–44.
13. Perry, P.A.; Donald, A.M. (2000). “The role of plasticization in starch granule assembly.” Biomacromolecules, 1, 424–432.
14. Vásconez, M.B.; Flores, S.K.; Campos, C.A.; Alvarado, J.; Gerschenson, L.N. (2009). “Antimicrobial activity and physical properties of chitosan–tapioca starch based edible films and coatings.” Food Res. Int. 42, 762–769.
15. Matsui, K. (2004). “Cassava bagasse-Kraft paper composites: Analysis of influence of impregnation with starch acetate on tensile strength and water absorption properties.” Carbohydr. Polym. 55, 237–243.
16. Sriroth, K.; Sangseethong, K. (2009). “Starch: An Important Component of the Paper Making Process; Thai Tapioca Starch Cellulose Association: Bangkok,” Thailand, Available online: http://www.thaitapiocastarch.org/article17.asp (accessed on 10 May 2015).
17. Lee, H.L.; Shin, J.Y.; Koh, C.H.; Ryu, H.; Lee, D.J.; Sohn, C. (2002). “Surface sizing with cationic starch: Its effect on paper quality and papermaking process.” Tappi J., 1, 34–40.
18. Bordenave, N.; Grelier, S.; Coma, V. (2010). “Hydrophobization and antimicrobial activity of chitosan and paper-based packaging material.” Biomacromolecules, 11, 88–96.
19. Trezza, T.A.; Vergano, P.J. (1994). “Grease resistance of corn zein coated paper.” J. Food Sci. 59, 912–915.
20. Parris, N.; Dickey, L.C.; Wiles, J.L.; Moreau, R.A.; Cooke, P.H. (2000). “Enzymatic hydrolysis, grease permeation and water barrier properties of zein isolate coated paper.” J. Agric. Food Chem. 48, 890–894.

Files

History

  • Receive Date: 21 April 2019
  • Revise Date: 20 May 2019
  • Accept Date: 23 August 2019

Share

How to cite

Statistics